Visit Our Other Stores: →   Discount BBQ Direct  •  Discount Outdoor Furniture Direct
  • Compare Products ()
  • Sign In
Toggle Nav
My Cart 0

1-800-986-0748CONTACT US

Menu
Account

Pristine Blue 8oz bottle

$14.99
In stock
SKU
PBlue8
Wish List Compare
No credit? Shop now. Pay over time. Get pre-approved

The Pristine Blue Pool Start Up Kit contains everything you need to get your chlorine pool started on Pristine Blue Pool Chemical.

Contains: 1- 64 ounce container PristineCheck, 1- 64 ounce container Pristine Blue, 4 pounds Clean Shock (sodium Di-chlor, PristineBlue Pool and Spa Care Guide.

TEST KIT is not included

 


Starting Your Pool on PristineBlue ®

Chlorine Pools, Spring Opening or Freshly Filled Pools

Start with a clean pool and functional equipment. Remove leaves and other debris and vacuum. Check to make sure pump, heater and other equipment are operational. Clean or backwash filters. Run the filter continuously through this start-up process.

Step 1: A. Calculate pool volume. B. Balance water in the following ranges: • Total Alkalinity 50 – 90 ppm • pH 7.2 – 7.6 • Calcium Hardness 100 – 300 ppm • Balancing the water may take several days. Be patient. It is well worth it. C. Add 2 ounces of PristineCheck® per 1,000 gallons of pool water. Wait 4 – 6 hours. D. Add one pound of PristineExtra® per 10,000 gallons of pool water. Calcium based chlorine shock may cause cloudy water. Avoid cal-hypo type shocks.

Step 2: A. 24 hours after the PristineCheck® has been added you need to backwash the filter or clean the cartridge. B. If you have used PristineBlue® in the past, test the PristineBlue® level and add PristineBlue® according to the Pool Top Off Chart. C. If you have never used PristineBlue®, add 2 ounces of PristineBlue® per 1,000 gallons of pool water.

It is very important that for the next two weeks you maintain your pH in the 7.2 – 7.6 range. Do not add any more PristineBlue® to the pool. After two weeks, use the following instructions.

Maintaining Your Pool with PristineBlue®

Every Two Weeks

1. Balance water • Total Alkalinity 50 – 90 ppm • pH 7.2 – 7.6 • Calcium Hardness 100 – 300 ppm 2. Test PristineBlue® level and top off according to the chart below. 3. Shock with 1 pound of PristinePower® per 10,000 gallons of water. 4. Add 2 ounces of PristineClean® per 10,000 gallons of water. 5. Add 2 ounces of PristineClear® per 10,000 gallons of water.

main product photo

The Pristine Blue Pool Start Up Kit contains everything you need to get your chlorine pool started on Pristine Blue Pool Chemical.

Contains: 1- 64 ounce container PristineCheck, 1- 64 ounce container Pristine Blue, 4 pounds Clean Shock (sodium Di-chlor, PristineBlue Pool and Spa Care Guide.

TEST KIT is not included

 


Starting Your Pool on PristineBlue ®

Chlorine Pools, Spring Opening or Freshly Filled Pools

Start with a clean pool and functional equipment. Remove leaves and other debris and vacuum. Check to make sure pump, heater and other equipment are operational. Clean or backwash filters. Run the filter continuously through this start-up process.

Step 1: A. Calculate pool volume. B. Balance water in the following ranges: • Total Alkalinity 50 – 90 ppm • pH 7.2 – 7.6 • Calcium Hardness 100 – 300 ppm • Balancing the water may take several days. Be patient. It is well worth it. C. Add 2 ounces of PristineCheck® per 1,000 gallons of pool water. Wait 4 – 6 hours. D. Add one pound of PristineExtra® per 10,000 gallons of pool water. Calcium based chlorine shock may cause cloudy water. Avoid cal-hypo type shocks.

Step 2: A. 24 hours after the PristineCheck® has been added you need to backwash the filter or clean the cartridge. B. If you have used PristineBlue® in the past, test the PristineBlue® level and add PristineBlue® according to the Pool Top Off Chart. C. If you have never used PristineBlue®, add 2 ounces of PristineBlue® per 1,000 gallons of pool water.

It is very important that for the next two weeks you maintain your pH in the 7.2 – 7.6 range. Do not add any more PristineBlue® to the pool. After two weeks, use the following instructions.

Maintaining Your Pool with PristineBlue®

Every Two Weeks

1. Balance water • Total Alkalinity 50 – 90 ppm • pH 7.2 – 7.6 • Calcium Hardness 100 – 300 ppm 2. Test PristineBlue® level and top off according to the chart below. 3. Shock with 1 pound of PristinePower® per 10,000 gallons of water. 4. Add 2 ounces of PristineClean® per 10,000 gallons of water. 5. Add 2 ounces of PristineClear® per 10,000 gallons of water.